Ruijie Community

Title: RG-RAP6260(H) After Changing from AP mode to Router Mode I don't have access from WEB. [Print this page]

Author: Roin@telco.ge Time: 2025-1-18 01:05
Title: RG-RAP6260(H) After Changing from AP mode to Router Mode I don't have access from WEB.
Hi everyone after moving RG-RAP6260(H) from AP mode to Router Mode I can't access it's web interface but can ping.
RG-RAP6260(H) is getting IP from DHCP and i see devices MAC address on router and also can be pinged from router and also from PC.Is there any specific requirement or IP address after changing from AP to Router mode ?

Author: v-saul@ruijie.c Time: 2025-1-18 01:13
Hello Roin,
Is the device online in cloud?
If you try to access through tunnel eweb is letting you?
What is the message that you are obtaining when try to open it?

Regards!

Author: Roin@telco.ge Time: 2025-1-18 01:20

TAC-Saul replied at 2025-1-18 01:13
Hello Roin,
Is the device online in cloud?
If you try to access through tunnel eweb is letting you ...

Device isn't in cloud our customer don't want to have device in Cloud.
Topology is next Cisco Router> Ruijie SW CS83 > RG-RAP6260(H).
If device is in AP mode it works good but as soon as we move it to router mode we lose access to it with web.
Message we get when we try to connect is just like that we can't access to it.
When we move from AP to Router mode device gets reset correct? also is any specific IP we have to access?

Author: v-saul@ruijie.c Time: 2025-1-22 06:02

Roin Lapachi replied at 2025-1-18 01:20
Device isn't in cloud our customer don't want to have device in Cloud.
Topology is next Cisco Rou ...

Roni, if you ping the ip of the AP once router mode it is responding you?
Yes once device is changed work mode, they will be restored and rebooted. You need to acccess them through their default ip 10.44.77.254

Regards

Author: Roin@telco.ge Time: 2025-1-22 14:57

TAC-Saul replied at 2025-1-22 06:02
Roni, if you ping the ip of the AP once router mode it is responding you?
Yes once device is chan ...

Hi Yes i Can ping device. Device is connected to Cisco Router, Cisco gives DHCP to Ruijie Switch and also it gives IP to AP. Ruijie AP get's IP normally and works great also Reyee AP is working great in AP mode.

But as soon i move AP mode to Router Mode. Device can be pinged but can't access to it's web interface.
Also Tried to access it's default IP 10.44.77.254 but when we're trying that we can't ping it.

Author: guominxiang@rui Time: 2025-1-22 16:54

Roin Lapachi replied at 2025-1-22 14:57
Hi Yes i Can ping device. Device is connected to Cisco Router, Cisco gives DHCP to Ruijie Switch a ...

Hello,
May I know whether you test device current DHCP address and 10.44.77.253?
Best regards,
Micca

Author: Roin@telco.ge Time: 2025-1-22 16:58

GTAC-Micca replied at 2025-1-22 16:54
Hello,

May I know whether you test device current DHCP address and 10.44.77.235?

DHCP was giving 192.168.1.0/24 network. I haven't tested 10.44.77.0 network.
When was giving 1.0/24 network Device was getting IP and was able to ping too but wasn't able to access web.
Haven't that problem in AP mode

Author: v-shaojinren@ru Time: 2025-1-22 17:30

Roin Lapachi replied at 2025-1-22 16:58
DHCP was giving 192.168.1.0/24 network. I haven't tested 10.44.77.0 network.
When was giving 1.0/ ...

Dear
To resolve this issue effectively, we encourage you to contact us on Rita(www.ruijienetworks.com/rita), our real-time support platform. Our dedicated engineers are readily available to resolve your issues promptly.

Welcome to Ruijie Community (https://community.ruijie.com/)