Title: Port mapping not working on my EG105GW(T) [Print this page] Author: Mr.T the OG Time: 2025-6-7 21:31 Title: Port mapping not working on my EG105GW(T) I have a EG105GW(T) main router and have a NBS3100-8GT2SFP-P switch - i'm trying to port forward an NVR on my switch but this fails to work externally -kindly advise what can be done to correct this ?
I have enabled ddns and have tried both the ruijie ddnsa + no-ip and dyn , but no luck.
I see a Public IP and a Wan ip - tried switching between the two .
my ports on ports checker are closed , regardless of the port mapping settings.
Some assistance will be appreciated Author: v-chengyuxin@ru Time: 2025-6-9 13:14
Dear Sir,
I hope this email finds you well.
Thank you for your inquiry, sir. I would like to know on which device the public IP is connected? If it is not directly connected to EG, maybe we also need to configure port mapping on the ISP router.
I wish you a happy life!
Best regards,
Eric Author: clickafrica@out Time: 2025-6-10 05:23
GTAC-Eric replied at 2025-6-9 13:14
Dear Sir,
I hope this email finds you well.
Thank you for your inquiry, sir. I would like to know on ...
I have reached out to the ISP , they'll advise at the soonest. You may have landed on the issue as some ISP do have a security layer.
from my call to them she mention a cg ip range which will need converting to a public ip it seems.
will let you know in the next day or so.
Welcome to Ruijie Community (https://community.ruijie.com/)