Title: EG210G, RAP6262G (3 units), and ES208GC Mesh Network [Print this page] Author: aiteampinoyruij Time: 2025-6-11 18:35 Title: EG210G, RAP6262G (3 units), and ES208GC Mesh Network We have a problem in our installation. here's the current scenario:
Router WAN0 -> Internet PLDT
Router Port 0 -> AP1
Router Port 2 -> Switch Port 1
Switch Port 3 -> AP2
Switch Port 5 -> AP3
Issue:
1. SSID is ok in AP1
2. The SSID is not available in AP2 and AP3
3. if the connection is Router Port 2 -> AP2, is ok. SSID is available.
For clarification:
1. What is the missing configuration in the switch so that SSID will be propagated to AP2 and AP3 Author: Oliver Time: 2025-6-18 03:37
Dear Customer,
Based on the current failure phenomenon, it seems the VLAN config of the switch is not well done, I suggest focus on the switch port1/3/5's link mode (trunk/access) and allowed VLAN based on your global network design.
If the issue persists, we encourage you to reach out to us through RITA( www.ruijienetworks.com/rita), our real-time support platform. Our dedicated engineers are readily available to resolve your issues promptly by remote support via Anydesk/Teamviewer/etc.
Thank you.
Welcome to Ruijie Community (https://community.ruijie.com/)