Title: How to delete system log information on Ruijie switches? [Print this page] Author: zhangqiao@ruiji Time: 2025-9-10 16:10 Title: How to delete system log information on Ruijie switches? If too many system logs are generated, you can limit the logging rate to reduce logs output to the monitor terminal. 1. Clear all security logs
You can use the following command to clear all security log information:
security-log delete all
2. Configuring the Output of System Logs to the Monitor Terminal
By default, the current monitor terminal is not allowed to output logs after you remotely connect to the device. You need to manually run the terminal monitor command to allow the current monitor terminal to display logs.
The terminal monitor command is valid only for the current connection. When the terminal reconnects to the device, the default settings of this command are restored.