Ruijie Community

Title: RG EW 1200 Pro mode Acces Point always change to mode wireless repeater ? [Print this page]

Author: Colin-X Time: 2025-10-9 15:47
Is this issue that occurred after you updated to the latest version? Is your current version 380?

Author: ipunkblues19@gm Time: 2025-10-17 18:26

Colin-X replied at 2025-10-9 15:47
Is this issue that occurred after you updated to the latest version? Is your current version 380?

...

i use ReyeeOS 1.317.1324
Latest
I think the issue is with AP mode. When I switch my device to AP mode, the Ruijie device goes offline, and I am using Mikrotik on my network. Does it have any effect on MikroTik?

Author: v-gaojie3@ruiji Time: 2025-10-17 18:34

Ayah Ipunk replied at 2025-10-17 18:26
i use ReyeeOS 1.317.1324
Latest
I think the issue is with AP mode. When I switch my device to AP ...

Sir, I suggest that you upgrade the version to the latest one.

Author: ipunkblues19@gm Time: 2025-10-18 14:27

RuiJay replied at 2025-10-17 18:34
Sir, I suggest that you upgrade the version to the latest one.

Okay, I am already on the latest firmware, version 380. After that, I switched it back to AP Mode, and it went offline on the cloud again. I then reset it to Router mode, and it became normal/online on the cloud. So the main issue is that this device cannot work in AP mode. Why?

Author: v-gaoxing1@ruij Time: 2025-10-29 12:09

Ayah Ipunk replied at 2025-10-18 14:27
Okay, I am already on the latest firmware, version 380. After that, I switched it back to AP Mode, ...

Hi Ayah Ipunk

Could you please confirm if you went offline in the cloud after changing to AP mode and then went back online again, or if you have been offline all along.
If it is re launched, the device needs to be restarted after changing modes. Therefore, there may be offline and online situations.
If you remain offline after changing to AP mode, please log in to the Eweb interface of your device to check the configuration, including DNS and Cloud service information.
If you still cannot go online after confirming that there are no problems, please reset the device and try configuring it again.

Welcome to Ruijie Community (https://community.ruijie.com/)