Title: Connecting two APs using EST100 bridge [Print this page] Author: ndiweninqaba@gm Time: 2026-2-5 18:57 Title: Connecting two APs using EST100 bridge Starlink |(Main gateway / NAT) |[ RG-RAP6262G #1 ] ← This is your Ruijie “root” AP | (LAN2) | Ruijie LAN |[ RG-EST100-E (Master) ] )))) Wireless backhaul (((([ RG-EST100-E (Client) ] | Ethernet | PoE Injector |[ RG-RAP6262G #2 ] | Wi-Fi UsersIs this possible.I want to connect an ethernet to LAN2 of AP 1 then connect it to the master of an EST 100 which will send the network to the EST100 client 300 metres away.then the second AP will be connected to a poe injector which gets LAN from the EST 100 client.Will the second AP use same captive portal as AP 1 like they are in a wireless mesh.The EST100s will pe powered by adapters.Author: v-chengyuxin@ru Time: 2026-2-5 19:45
Thank you very much for your consultation, sir. Yes, this is feasible. The EST device will transmit all data, which will meet the internet access needs of wireless devices connected to AP2. We need wireless users under AP2 to perform portal authentication. If the portal policy is configured based on IP network segments, we need to ensure that the network segments of the wireless users have not changed.
Welcome to Ruijie Community (https://community.ruijie.com/)