Ruijie Community

Title: Question: RG-ES207GS-PI-O & RG-ES207GS-AC-OD POE output power 48v & 24v [Print this page]

Author: jacques@aquilat Time: 2026-11-7 03:59
Title: Question: RG-ES207GS-PI-O & RG-ES207GS-AC-OD POE output power 48v & 24v
Hello Community
Can I connect Reyee 5GHz AC 10dBi 60° Pre-Paired Kit RG-EST310 V2 & Reyee Dual Band WiFi 5 1300Mbps Gigabit Compact Outdoor AP RG-RAP52G to RG-ES207GS-PI-O & RG-ES207GS-AC-OD POE Output ports?

Author: v-carrillo@ruij Time: 2026-11-7 05:02
Hello, valued customer.
It is not possible to connect the RG-EST310 to a PoE switch, as these bridges use 24V passive PoE or require power via their 12V/1A DC jack. As for the RG-RAP52OD access point, it is compatible with your switches and can be connected without any issues. You may check the product pages for these devices to confirm that the access point and the switch are compatible with each other.

AP https://reyee.ruijie.com/en-global/products/reyee-wireless/reyee-outdoor-ap/rap52od/
Switch https://reyee.ruijie.com/en-global/products/reyee-switch/smart-cctv-switch/rg-es207gs-pi-od/

Author: jacques@aquilat Time: 2026-11-7 17:54

GTAC-Sergio replied at 2026-11-7 05:02
Hello, valued customer.
It is not possible to connect the RG-EST310 to a PoE switch, as these bridg ...

Ok thanks for reply. Next question can I then plug in Ubiquiti 802.3af to 24VDC Gigabit Outdoor Adapter to POE Output ports and then connect RG-EST310 to Ubiquiti 802.3af to 24VDC Gigabit Outdoor Adapter?

Author: v-yuchen3@ruiji Time: 2026-11-7 20:43

Jacques Rossouw replied at 2026-11-7 17:54
Ok thanks for reply. Next question can I then plug in Ubiquiti 802.3af to 24VDC Gigabit Outdoor Ad ...

Sir, The Ruijie manual explicitly states that mixing third-party PoE modules is not recommended, as it poses a risk of device burnout. It is advised to purchase power adapters or PoE adapters that come natively with Ruijie products.

Author: v-yuchen3@ruiji Time: 2026-11-7 20:43

Jacques Rossouw replied at 2026-11-7 17:54
Ok thanks for reply. Next question can I then plug in Ubiquiti 802.3af to 24VDC Gigabit Outdoor Ad ...

Author: jacques@aquilat Time: 2026-11-8 02:07

GTAC-Morning replied at 2026-11-7 20:43
Sir, The Ruijie manual explicitly states that mixing third-party PoE modules is not recommended, a ...

Well Ruijie\Reyee please design a POE 802.3af to 24VDC Gigab....it Outdoor Adapter so that I can connect it to your 24V devices from 48v switches....

Welcome to Ruijie Community (https://community.ruijie.com/)