Ruijie Community

Title: How to create bridge on NBR6205-E [Print this page]

Author: Thiago Regina Time: 2023-9-29 03:55
Title: How to create bridge on NBR6205-E
Hello,
I need to perform the configuration below on the NBR6205-E

Create a new bridge with ip 192.168.4.254/24 and included interface LAN1, LAN2 and LAN3.
In my LAN0 will be my management interface with ip 172.16.2.1/24.

The configuration in case 2 worked, but i'm in doubt in case 1.
I need help for configuration in eWeb interface and Cloud.
Can you help me ?

Thanks you for now.

Author: javier@ruijie.c Time: 2023-9-29 09:09
Hello dear:

You can check the config gide on section 7. Network configuration to check if the settings deployed were correct.

Here's the link:

https://www.ruijienetworks.com/resources/preview/77350

We kindly ask you to contact us on RITA Live Chat to check the config performed. Here's the link:

https://networks.s5.udesk.cn/im_client/?web_plugin_id=1296&language=en-us

Regards,

Javier

Author: refeta8674@hiep Time: 2025-10-7 09:58

GTAC-Javier replied at 2023-9-29 09:09
Hello dear:

You can check the config gide on section 7. Network configuration to check if the sett ...

[color=rgba(0, 0, 0, 0.96)]Bridging those interfaces seems straightforward enough, but the management interface on LAN0 and cloud interaction throws a wrench in the works. I'm particularly concerned about the eWeb interface setup; any guidance there would be greatly appreciated. Really keen to understand the best approach for case 1!

Author: v-gaoxing1@ruij Time: 2025-10-9 16:09

Raymond Silva replied at 2025-10-7 09:58
Bridging those interfaces seems straightforward enough, but the management interface on LAN0 and c ...

You can configure sub interfaces and the IP network segment you need in the main interface, and then configure the interface you want to pass through as Lan port

Welcome to Ruijie Community (https://community.ruijie.com/)