Ruijie Community

Title: How to reduce transmit power for Wireless Bridge [Print this page]

Author: lukasz@satworld Time: 2024-5-31 20:22
Title: How to reduce transmit power for Wireless Bridge

Author: guominxiang@rui Time: 2024-5-31 20:42
Hello Lukasz Ptak,

You can check from the below screenshot of configuration.

You can test it first, if there are still problems, please feel free to contact me. I'd be happy to help you in the community.

Author: lukasz@satworld Time: 2024-5-31 20:48

GTAC-Micca replied at 2024-5-31 20:42
Hello Lukasz Ptak,

You can check from the below screenshot of configuration.

Author: liujunhui1@ruij Time: 2024-5-31 21:20

Lukasz Ptak replied at 2024-5-31 20:48

Dear Sir

that means the signal strength of the current equipment has been reduced to a minimum
May I know the current issue you encountered?
please feel free to contact me. I'd be happy to help you in the community.

best regards,m
Ross

Author: lukasz@satworld Time: 2024-5-31 21:53

GTAC-Ross replied at 2024-5-31 21:20
Dear Sir

that means the signal strength of the current equipment has been reduced to a minimum

That's not an issue, looking for more information.
Actually I can see 4th option to go which wasn't there yesterday ''lower''
Power settings looks like
LOWER  -  20dBm
LOW    -  23dBm
MEDIUM -  25dBm
HIGH    - 26dBm
But if I want to setup wireless bridge with distance 50m, I should get option to go lower than 20dBi because with that power, devices interference one to each other also signal level at -33dBm can be case of wireless link drops.

Welcome to Ruijie Community (https://community.ruijie.com/)