Ruijie Community

Title: Disable LEDS in Ruijie AP [Print this page]

Author: hturunckapi@dep Time: 2024-6-14 16:30
Title: Disable LEDS in Ruijie AP
Can we turn off the LED lights on 810(L) and 820V2 products?

Author: taizhaolong@rui Time: 2024-6-14 18:01
Dear,

You may refer to this post:
How to disable Ruijie AP LED? - Wireless - Ruijie Community (ruijienetworks.com)

RD,
David

Author: puzzlingcoalore Time: 2024-6-20 14:55
Yes, you can turn off the LED lights on the Reyee 810(L) and 820V2 products. This is often possible through the device's management interface.

Author: extremecardrivi Time: 2024-6-20 16:34
Yes You Can turn off the LED lights on 810(L) and 820V2 products.

Author: lulenzgm2000@gm Time: 2026-7-6 17:10
Yes, you can absolutely turn off the LED lights on all of these models, but the method depends on whether you are managing them as Enterprise APs (RG-AP810-L and RG-AP820-L(V2)) or Reyee APs (RG-RAP52-OD).For

Reyee Series (RG-RAP52-OD)

Since this is a Reyee OS device, it is incredibly easy to manage via the local web interface (Eweb) or the mobile application.

Via the Ruijie Reyee App:
Go to your project, tap into your device workspace, find the RG-RAP52-OD, navigate to its settings, and toggle the LED switch to off. You can also configure Night Mode to schedule a specific window when the LEDs remain off.
Via Local Eweb:
Log directly into the AP's management IP, navigate to Advanced / System, and find the LED status toggle to turn it off.

2. For Enterprise Series (RG-AP810-L and RG-AP820-L V2)

The 810(L) and 820(V2) are enterprise-tier access points. Ruijie uses what they call Quiet Mode to disable the status LEDs. This can be managed directly via the Command Line Interface (CLI) or through your Wireless Controller (AC) if deployed in Fit AP mode.

Option A: Via the Command Line Interface (CLI)

If the AP is running in standalone Fat mode or managed via the cloud, log in via SSH and apply a 24-hour time schedule to shut them off completely:
Plaintext

Ruijie# configure terminalRuijie(config)# schedule session 1Ruijie(config)# schedule session 1 time-range 1 period Sun to Sat time 00:00 to 23:59Ruijie(config)# exitRuijie(config)# quiet-mode session 1

(Note: To turn them back on later, simply negate the command with
no quiet-mode session 1
.)

Option B: Via a Wireless Access Controller (AC)

If these units are deployed in Fit mode under a hardware controller, you push the change directly from the AC configuration to a specific AP:
Plaintext

AC(config)# schedule session 1AC(config)# schedule session 1 time-range 1 period Sun to Sat time 00:00 to 23:59AC(config)# ap-config <AP-NAME-OR-MAC>AC(config-ap)# quiet-mode session 1

Welcome to Ruijie Community (https://community.ruijie.com/)