no extended ACL in NBS5200-24SFP/8GT4XS

hi there

i just want to know if this layer3 model NBS5200-24SFP/8GT4XS supports extended acl because what i seen in cloud management the only available is the standard acl not a granular type of acl.

thanks

Hello sir, the NBS5200-24SFP/8GT4XS supports extended ACLs. Please refer to the device's configuration documentation for details：https://reyee.ruijie.com/en-global/support/documents/slide_rg-nbs3200-series-switches-reyeeos-2340-configuration-guide/?page=html&keyworks=ACL#_Toc210914067

GATC-Emily replied at 2026-1-7 09:26
Hello sir, the NBS5200-24SFP/8GT4XS supports extended ACLs. Please refer to the device's configurati ...

hi emily

• i have a question is this pure layer2+ or layer3 and good for medium enterprise setup? base on the documentation the mac entries maximum to 16,000 entries means 16k client pc can accommodate correct me if i'm wrong. i want this switch as a dhcp server do you think this model give me the right direction?
  

thanks

Ravdrak replied at 2026-1-14 10:40
hi emily

Hello,

The switch model NBS5200-24SFP/8GT4XS supports the DHCP server function, but does not support the NAT function. Therefore, if you intend to configure it as a gateway, please do not forget to set up a static route for the upstream connection and point it to the NBS address; otherwise, users will not be able to access the internet.
In addition, although the MAC address table capacity is as high as 16,000 entries, this does not mean that 16,000 users can use the switch simultaneously. The recommended maximum number of users for this model is 700.
Regarding the deployment method, I strongly recommend communicating and consulting with the pre-sales team. They will design a more professional solution based on your network deployment scenario and actual requirements.

Best regards,
Micca