RRM constantly running

We have a strange problem. The 5GHz RRM is constantly in the running status. Restarting the controller and access points does not solve the problem.
Before that, everything worked fine for 1 year.
The RRM settings are like this now:
rrm 5g channel dynamic enable
rrm 2.4g channel dynamic enable
rrm 5g channel bandwidth current
rrm 2.4g channel bandwidth current
rrm 5g mode enable
rrm 2.4g mode enable

Deleting these lines from the configuration also does not solve the problem.

1) What could this be related to?
2) Is there any way to forcibly stop RRM?


wlc-ruijie#sh rrm summary
Radio Resource Management
  Radio Type..................................... 5G
  RRM Enable Mode................................ Enable
  Channel Width Strategy......................... Current
  Channel Dynamic Enable Mode.................... Enable
  Blind Mode..................................... Disable
  Run Status..................................... Running
Radio Resource Management
  Radio Type..................................... 2.4G
  RRM Enable Mode................................ Enable
  Channel Width Strategy......................... Current
  Channel Dynamic Enable Mode.................... Enable
  Blind Mode..................................... Disable
  Run Status..................................... Init
wlc-ruijie#sh ap-config summary | inc *
Radio               Radio               Up/Off time   State
1  E   0   11*  100 2  E   0  153*  100    8:17:36:12 Run
1  E   0    6     3 2  E   0  157*    9    9:16:19:31 Run
1  E   0   11     3 2  E   0  153*    9    9:16:18:17 Run
1  E   0    1     3 2  E   0  157*    9    9:16:20:14 Run
1  E   0    1     3 2  E   0  153*    9    9:16:21:09 Run
1  E   1    6   100 2  E   0  149*  100    9:16:18:53 Run
1  E   0    6    39 2  E   0  149*  100    0:22:36:57 Run
1  E   0    1   100 2  E   0  161*  100    0:22:36:58 Run
1  E   0    6   100 2  E   0  157*  100    0:22:37:33 Run
1  E   0    6     3 2  E   0  153*    9    9:16:20:15 Run
1  E   1   11     3 2  E   0  161*    9    9:16:21:08 Run
1  E   0    6     3 2  E   0  161*    9    9:16:19:00 Run
System description      : Ruijie Gigabit Wireless Switch(WS6108) By Ruijie Networks.
System start time       : 2025-12-09 19:37:42
System uptime           : 9:16:33:20
System hardware version : 1.40
System software version : AC_RGOS 11.9(6)W3B1, Release(11200520)

Dear customer,
You can try disabling it via the RRM via the command below.

1. Disable dynamic channel adjustment for the entire 5GHz band:
Hostname(config)# no rrm 5g channel dynamic enable
2. Disable dynamic channel adjustment for the 5GHz band under the default group:
Hostname(config)# ap-group default
Hostname(config-group)# no rrm 5g channel dynamic enable
3. Disable automatic RF adjustment for new APs in the entire 5GHz band:
Hostname(config)# no rrm 5g mode enable
Once you disable it, you can save the settings.
Hostname(config)# end


Hostname# wr



If the issue persists, we encourage you to contact us on Rita(www.ruijienetworks.com/rita) , our real-time support platform. Our dedicated engineers are readily available to resolve your issues promptly.