RG wall 1600-z3200 SNMP

i need to enable the SNMP function in my RG wall 1600-z3200. any one have the MIB llist?

I have sent you the email. Please check it.

GTAC-Colin replied at 2025-12-10 22:14
I have sent you the email. Please check it.

okay.. thanks. and i have more question sir, after im created around 16 rules block app & url also default feature on like (Av scan, behavioral, traffic learning, SSL Proxy, syslog). somehow it crash after 8 hours, the traffic began slow, sometimes RTO and unresponsive ( i cant gain access the rg wall during this incident). need to hard reboot the device then check the hardware monitor, the cpu seem fine max is under 30% but the ram usage is touching 80%. what im suppose to do to fix this, can we upgrade the ram or we need to tuning the the config so it can have less than 16 rules?
FYI we used 3G license and at the moment of incident our user is only 56.

Kiessen replied at 2025-12-12 08:40
okay.. thanks. and i have more question sir, after im created around 16 rules block app & url also ...

You need to confirm if you were using a relatively large amount of data on your network at that time, which is likely due to excessive traffic. You can configure speed limits

GTAC-Colin replied at 2025-12-12 13:28
You need to confirm if you were using a relatively large amount of data on your network at that ti ...

Do we have an alternative solution for exporting/downloading URL logs instead of using syslog?

Kiessen replied at 2025-12-16 14:41
Do we have an alternative solution for exporting/downloading URL logs instead of using syslog?

For RG-WALL 1600-Z3200-S, besides using Syslog, the device supports other options to obtain log data:

• Export of traffic learning logs – Supported
  You can export traffic learning logs directly from the device for analysis.
  
• Configuration export using a USB flash drive – Supported
  Device configurations, including relevant log data, can be exported to a USB flash drive when needed.
  
  

However, please note that rLOG is not supported, and recording of web security logs is also not supported on this model.