Zigbee connection with Ruijie AP?

Is there a device/model (AP) that can connect to zigbee? Is there a detaild documentation for this ?

Dear
Sir, may I know whether your Zigbee device is an end device, a router device, or a wireless controller? Generally speaking, Ruijie does not provide specific cases of mixed networking with third - party devices. However, if you encounter any technical problems during the use of Ruijie APs, you can contact us at any time.


best regards

RG-AP860-I        BLE 5.0, Zigbee        Dual-band Wi-Fi 6, USB for IoT expansion
RG-AP880-I        BLE 5.1, Zigbee        High-performance Wi-Fi 6 + IoT

I also looking the same cookbook
1. is those AP act as gateway
2. do I need wireless controller WS model
3. can I control my zigbee lamp from cloud

nbctcp bun replied at 2025-7-20 07:39
RG-AP860-I        BLE 5.0, Zigbee        Dual-band Wi-Fi 6, USB for IoT expansion
RG-AP880-I        BLE 5.1, Zigbee        High- ...

Dear customer,
1. When the AP is in FAT mode, it will work as the gateway for connected devices
2. It depends on the work mode of the AP wether it needs a wireless controller.
FIT mode: it will need to be managed by a wireless controller.
FAT mode: it works like a router that does not need a wireless controller.
Cloud managed mode(MACC mode): Ruijie Cloud will works as the controller for managed APs
3. You can access the ports of the devices connected in you LAN via NAT traversal. You can check the following document for more details. However, it is not guaranteed that it will work for all 3rd-party devices.

https://cloud.ruijienetworks.com/help/#/ArticleList?id=c1dcb61b9af349b0ae8edcfac637cf4c