Can I know the username of STA on WS6008?

Can I know the username of STA on WS6008, but without Radius and PPSK?

Hi,

I think you can check it with the following command but it provides the MAC and the IP fo the STA associated with the AC not the username
show ac-config client [ by-ap-name | 802.11a | 802.11b | 802.11n | 802.11g | 802.11ac | 802.11ax
| other ]

Rgds
Marco

Hi Sir,
You can use those command to check:
show ac-config client ------ displays the information of all STA connections on this AC, including the number of people online, MAC address of wireless users, IP address, associated AP, VLAN, SSID, associated rate, authentication method and online time, etc.
show ac-config client detail mac-address ------ displays detailed information of the wireless user with the specified MAC address, including roaming status, etc.
show ac-config client statistic ------ to view statistics on the number of times per second and the speed at which users log in

Hi Sir,
You can use those command to check:
show ac-config client ------ displays the information of all STA connections on this AC, including the number of people online, MAC address of wireless users, IP address, associated AP, VLAN, SSID, associated rate, authentication method and online time, etc.
show ac-config client detail mac-address ------ displays detailed information of the wireless user with the specified MAC address, including roaming status, etc.
show ac-config client statistic ------ to view statistics on the number of times per second and the speed at which users log in

GTAC-Morning replied at 2025-9-24 10:21
Hi Sir,
You can use those command to check:
show ac-config client ------ displays the information of ...

Hi,
i try the command and it just show the mac address, my concern is can we know the username of user without using ppsk/radius?

Aura Sony Putra Pambuka replied at 2025-9-24 11:13
Hi,
i try the command and it just show the mac address, my concern is can we know the username of  ...

Hi Sir,
I know you mean,you can follow this guide to do that:
View the encryption method of the wireless user: Use the command show wclient security [Client MAC address] to view the security policy type and encryption method of the specified wireless user. For example:
Ruijie# show wclient security 001f.3b3b.b411
Security policy type :WPA-802.1X
Security cipher mode :TKIP
Security EAP type : PEAP

"View Radius server configuration:
The command 'show radius server' can be used to view information such as the IP address and port status of the Radius server:
Ruijie# show radius server
Server IP: 192.168.33.244
Accounting Port: 1813
Authen Port: 1812
Server State: active
If you need to view the shared key of the radius server, you can use the command 'show run: in radiradius -server